Pokouším se připojit k serveru...

Připojení k serveru bylo ztraceno. Vyčkejte na znovuobnovení stránky, nebo ji obnovte ručně.

CONTINUE SHOPPING
MAIN MENU


Our specialisation




MAIN CATEGORIES
Blog / Articles

I-Track Car Motion Road bedding plates

-20%
New
IN STOCK
Asphalt Road Plate forms the final road surface of the I-Track system. It is glued onto the Roadbed Plate (Straßenbettung Platte). The surface has a realistic asphalt appearance and comes with printed road markings. This makes it quick and easy to create a realistic road ready for CarMotion operation.
9,67€
DETAIL
-20%
IN STOCK
The 1 mm thick I-Track roadbed makes building single- and two-lane CarMotion roads easy. Glue it to the baseboard with wood glue or Hacker CA glue. Mark the road layout and glue down the first roadbed strip. Glue Viessmann magnetic tape 3×1 mm (V8430) directly along its edge, then glue another strip against the other side of the tape. Use STRAIGHT sections for straights and FLEXI sections for curves. Finish by gluing on I-Track asphalt road plates with printed road markings. Choose plates to suit the road’s length and width. Depending on the type, AT1 and AT2 versions with a pedestrian crossing are available. This creates a finished road without filling or painting. If you use FLEXI sections to create a curve with a different radius from the I-Track asphalt plates, finish the surface with acrylic filler or Vollmer Steinkunst modelling paste. Once dry, paint it and add road markings.
9,90€
DETAIL
-20%
IN STOCK
The 1 mm thick I-Track FLEXI roadbed makes building single- and two-lane CarMotion roads with custom curves easy. Glue it to the baseboard with wood glue or Hacker CA glue. Mark the road layout, shape the first roadbed strip and glue it down. Glue Viessmann magnetic tape 3×1 mm (V8430) directly along its edge, then glue another roadbed strip against the other side of the tape. Use FLEXI sections for curves and STRAIGHT sections for straights. Finish the surface with acrylic filler or Vollmer Steinkunst modelling paste. Once dry, paint it and add road markings. If the curve radius matches the I-Track asphalt road plates, glue these onto the roadbed for a finished road without filling or painting. The plates have printed road markings. Choose them to suit the road’s radius, length and width. Depending on the type, AT1 and AT2 versions with a pedestrian crossing are available.
12,40€
DETAIL
-20%
IN STOCK
Transition piece. For curves with a radius of less than 20 cm, use the FLEXI transition piece HCT9403T and continue with FLEXI segments 2,85 cm HCT9402F. This increases the spacing of the guide magnetic strips to 1 cm, allowing longer vehicles and buses to pass each other safely in curves. At the end of the curve, use the same transition piece again to return to the standard spacing of the guide magnetic strips of 4 cm on straight sections.
4,91€
DETAIL
-20%
IN STOCK
The 1 mm thick I-Track roadbed makes building single- and two-lane CarMotion roads easy. Glue it to the baseboard with wood glue or Hacker CA glue. Mark the road layout and glue down the first roadbed strip. Glue Viessmann magnetic tape 3×1 mm (V8430) directly along its edge, then glue another strip against the other side of the tape. Use STRAIGHT sections for straights and FLEXI sections for curves. Finish by gluing on I-Track asphalt road plates with printed road markings. Choose plates to suit the road’s length and width. Depending on the type, AT1 and AT2 versions with a pedestrian crossing are available. This creates a finished road without filling or painting. If you use FLEXI sections to create a curve with a different radius from the I-Track asphalt plates, finish the surface with acrylic filler or Vollmer Steinkunst modelling paste. Once dry, paint it and add road markings.
9,90€
DETAIL
-20%
IN STOCK
The 1 mm thick I-Track FLEXI roadbed makes building single- and two-lane CarMotion roads with custom curves easy. Glue it to the baseboard with wood glue or Hacker CA glue. Mark the road layout, shape the first roadbed strip and glue it down. Glue Viessmann magnetic tape 3×1 mm (V8430) directly along its edge, then glue another roadbed strip against the other side of the tape. Use FLEXI sections for curves and STRAIGHT sections for straights. Finish the surface with acrylic filler or Vollmer Steinkunst modelling paste. Once dry, paint it and add road markings. If the curve radius matches the I-Track asphalt road plates, glue these onto the roadbed for a finished road without filling or painting. The plates have printed road markings. Choose them to suit the road’s radius, length and width. Depending on the type, AT1 and AT2 versions with a pedestrian crossing are available.
12,40€
DETAIL
-20%
IN STOCK
The 1 mm thick I-Track roadbed makes building single- and two-lane CarMotion roads easy. Glue it to the baseboard with wood glue or Hacker CA glue. Mark the road layout and glue down the first roadbed strip. Glue Viessmann magnetic tape 3×1 mm (V8430) directly along its edge, then glue another strip against the other side of the tape. Use STRAIGHT sections for straights and FLEXI sections for curves. Finish by gluing on I-Track asphalt road plates with printed road markings. Choose plates to suit the road’s length and width. Depending on the type, AT1 and AT2 versions with a pedestrian crossing are available. This creates a finished road without filling or painting. If you use FLEXI sections to create a curve with a different radius from the I-Track asphalt plates, finish the surface with acrylic filler or Vollmer Steinkunst modelling paste. Once dry, paint it and add road markings.
9,90€
DETAIL
-20%
IN STOCK
The 1 mm thick I-Track FLEXI roadbed makes building single- and two-lane CarMotion roads with custom curves easy. Glue it to the baseboard with wood glue or Hacker CA glue. Mark the road layout, shape the first roadbed strip and glue it down. Glue Viessmann magnetic tape 3×1 mm (V8430) directly along its edge, then glue another roadbed strip against the other side of the tape. Use FLEXI sections for curves and STRAIGHT sections for straights. Finish the surface with acrylic filler or Vollmer Steinkunst modelling paste. Once dry, paint it and add road markings. If the curve radius matches the I-Track asphalt road plates, glue these onto the roadbed for a finished road without filling or painting. The plates have printed road markings. Choose them to suit the road’s radius, length and width. Depending on the type, AT1 and AT2 versions with a pedestrian crossing are available.
12,40€
DETAIL
-20%
IN STOCK
Transition piece. For curves with a radius of less than 20 cm, use the FLEXI transition piece HCT9402T and continue with FLEXI segments 2,85 cm HCT9402F. This increases the spacing of the guide magnetic strips to 1 cm, allowing longer vehicles and buses to pass each other safely in curves. At the end of the curve, use the same transition piece again to return to the standard spacing of the guide magnetic strips of 4 cm on straight sections.
5,79€
DETAIL
-20%
IN STOCK
The 1 mm thick I-Track roadbed makes building single- and two-lane CarMotion roads easy. Glue it to the baseboard with wood glue or Hacker CA glue. Mark the road layout and glue down the first roadbed strip. Glue Viessmann magnetic tape 3×1 mm (V8430) directly along its edge, then glue another strip against the other side of the tape. Use STRAIGHT sections for straights and FLEXI sections for curves. Finish by gluing on I-Track asphalt road plates with printed road markings. Choose plates to suit the road’s length and width. Depending on the type, AT1 and AT2 versions with a pedestrian crossing are available. This creates a finished road without filling or painting. If you use FLEXI sections to create a curve with a different radius from the I-Track asphalt plates, finish the surface with acrylic filler or Vollmer Steinkunst modelling paste. Once dry, paint it and add road markings.
9,90€
DETAIL
-20%
IN STOCK
The 1 mm thick I-Track FLEXI roadbed makes building single- and two-lane CarMotion roads with custom curves easy. Glue it to the baseboard with wood glue or Hacker CA glue. Mark the road layout, shape the first roadbed strip and glue it down. Glue Viessmann magnetic tape 3×1 mm (V8430) directly along its edge, then glue another roadbed strip against the other side of the tape. Use FLEXI sections for curves and STRAIGHT sections for straights. Finish the surface with acrylic filler or Vollmer Steinkunst modelling paste. Once dry, paint it and add road markings. If the curve radius matches the I-Track asphalt road plates, glue these onto the roadbed for a finished road without filling or painting. The plates have printed road markings. Choose them to suit the road’s radius, length and width. Depending on the type, AT1 and AT2 versions with a pedestrian crossing are available.
12,40€
DETAIL
-20%
IN STOCK
Transition piece. For curves with a radius of less than 20 cm, use the FLEXI transition piece HCT9403T and continue with FLEXI segments 2,85 cm HCT9402F. This increases the spacing of the guide magnetic strips to 1 cm, allowing longer vehicles and buses to pass each other safely in curves. At the end of the curve, use the same transition piece again to return to the standard spacing of the guide magnetic strips of 4 cm on straight sections.
4,91€
DETAIL
Blog / Articles Model Trains Shop 3D printing, 3D construction NAD 2.500,- DOPRAVA PO ČR ZDARMA

+420 313 564 381
[email protected]
Hacker Model Production a.s.
Zahradní 465, 270 54 Řevničov (map)
Czech Republic
ID NUMBER: 63271532, Vat ID: CZ63271532

OPENING HOURS
MON - THURS: 9:00 - 16:00
FRI: 9:00 - 14:00
SO: by telephone appointment

Write to us
Please enter your name.
Please enter your phone number
Please enter your e-mail
Please enter the text
You must agree to process data
All rights reserved © Hacker Model Production a.s. | Cookies
Creation of the system InGenius Webdesign