Pokouším se připojit k serveru...

Připojení k serveru bylo ztraceno. Vyčkejte na znovuobnovení stránky, nebo ji obnovte ručně.

CONTINUE SHOPPING
MAIN MENU


Our specialisation




MAIN CATEGORIES
Blog / Articles

NEWS

New
IN STOCK

RTF+ version – finished aircraft with installed motor, speed controller and servos.

An ideal first RC aircraft for beginner pilots who already own an RC radio set. The model is fully prepared at the factory and does not require any building.

A propeller is included. Receiver, transmitter, battery and charger are not included.

DETAIL
New
IN STOCK

Basic version – finished aircraft without electronics.

An ideal first RC aircraft for beginner pilots. The model is fully prepared from the factory and does not require building – it only needs to be equipped with the POKEY FirstFly equipment set or your own electronics.

A perfect choice for those who want to install the components themselves or use their own equipment.

DETAIL
New
IN STOCK
SA struts for the installation of the next floor of the track. The SA posts are 200 mm high and have a special design that provides the necessary strength to be used in any location for the installation of any I-Track system board. The I-Track plates are self-supporting - they have a special construction that guarantees rigidity and very low weight. The reinforcing crossbars have holes that can be used for cable installation. Holes in the underside of the board ensure access to all locations. So in a moment, using SA posts, you can easily create a bridging section of track or create a "hidden station" at any point on the track. Any board from the I-Track range can be used. You can also use the SA posts to install the boards side by side or on top of each other to create several levels as required.
22,58€
DETAIL
New
IN STOCK
Base plate 6 cm. The board has a special construction that guarantees rigidity and very low weight. The reinforcing bars have openings at the top that can be used for cable installation. Holes in the bottom plate provide access to all locations.
60,50€
DETAIL
New
IN STOCK
  • On the I-Track overhead tracks and the Rondela spiral climb, you ensure that the tracks are positioned correctly using the I-Track Spacers R. Slide the R Spacers onto the tracks and press them onto the I-Track segment. You put them denser in curves, larger distances are enough on the plane. You screw the rails or glue with CA Hacker glue to the track-bed. Lift the R Spacers and use them to lay next tracks. I-Track Spacers R can be used for both "flexi" tracks and track with bedding to ensure the correct track position. The set contains 12 Spacers.
    6,80€
    DETAIL
    New
    IN STOCK
    Mounting supports for building roads from I-Track CarMotion segments are available in lengths from 27–197 mm (No. 1–18, each set contains 12 pieces of the same size) in 10 mm increments. A complete set, cat. no. HCT9452-20, is also available, containing supports No. 1–18 with 2 pieces each. The set includes all components required for installation on the baseboard, including screws. The supports are designed for precise adjustment of gradient and height when building roads in the CarMotion system. The design allows easy installation and flexible route configuration.
    18,00€
    DETAIL
    New
    IN STOCK
    I-Track segments are designed for easy construction of elevated roads, bridges and smooth height transitions within the Car Motion system. They enable fast and precise creation of a stable road infrastructure. The segments are made of high-quality plywood and are supplied as a kit. Straight and curved versions are available, with curved segments configurable for left- or right-hand curves. The individual parts are easily assembled using CA Hacker superglue or wood glue, without the need for cutting or sanding. Thanks to their well-designed construction, the segments are strong and resistant to bending. The height and gradient of the roads can be easily adjusted using I-Track struts. The dimensions of the segments correspond to common CarMotion systems, ensuring easy compatibility and seamless integration into existing layouts.
    8,21€
    DETAIL
    New
    IN STOCK
    I-Track segments are designed for easy construction of elevated roads, bridges and smooth height transitions within the Car Motion system. They enable fast and precise creation of a stable road infrastructure. The segments are made of high-quality plywood and are supplied as a kit. Straight and curved versions are available, with curved segments configurable for left- or right-hand curves. The individual parts are easily assembled using CA Hacker superglue or wood glue, without the need for cutting or sanding. Thanks to their well-designed construction, the segments are strong and resistant to bending. The height and gradient of the roads can be easily adjusted using I-Track struts. The dimensions of the segments correspond to common CarMotion systems, ensuring easy compatibility and seamless integration into existing layouts.
    21,17€
    DETAIL
    New
    IN STOCK
    I-Track segments are designed for easy construction of elevated roads, bridges and smooth height transitions within the Car Motion system. They enable fast and precise creation of a stable road infrastructure. The segments are made of high-quality plywood and are supplied as a kit. Straight and curved versions are available, with curved segments configurable for left- or right-hand curves. The individual parts are easily assembled using CA Hacker superglue or wood glue, without the need for cutting or sanding. Thanks to their well-designed construction, the segments are strong and resistant to bending. The height and gradient of the roads can be easily adjusted using I-Track struts. The dimensions of the segments correspond to common CarMotion systems, ensuring easy compatibility and seamless integration into existing layouts.
    7,79€
    DETAIL
    New
    IN STOCK
    Rondela- R2/R3 = R437,5/515mm, 540° (H0), complete kit. The complete 1,5-circle kit contains all the required stands, track segments, entry and exit segment, guardrail, installation parts and detailed assembly instructions. RONDELA Spiral track to change level is designed for entrances and exits to a hidden station and a large change in track height in a spiral climb. Each Rondela has the option to be assembled left hand thread or right hand thread. Suitable For: Märklin and tracks of these radii.
    153,71€
    DETAIL
    New
    IN STOCK
    Rondela- R2/R3 = R437,5/515mm,360° (H0), complete kit. The complete 1-circle kit contains all the required stands, track segments, entry and exit segment, guardrail, installation parts and detailed assembly instructions. RONDELA Spiral track to change level is designed for entrances and exits to a hidden station and a large change in track height in a spiral climb. Each Rondela has the option to be assembled left hand thread or right hand thread. Suitable For: Märklin and tracks of these radii.
    112,12€
    DETAIL
    New
    IN STOCK
    Rondela Märklin C 437,5/515mm360° H0, next floor complete kit. The complete 1-circle next floor kit contains all the required stands, track segments, guardrail, installation parts and detailed assembly instructions. RONDELA Spiral track to change level is designed for entrances and exits to a hidden station and a large change in track height in a spiral climb. Each Rondela has the option to be assembled left hand thread or right hand thread. Suitable For: TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and tracks of these radii.
    107,08€
    DETAIL
    Blog / Articles Model Trains Shop 3D printing, 3D construction NAD 2.500,- DOPRAVA PO ČR ZDARMA

    +420 313 564 381
    [email protected]
    Hacker Model Production a.s.
    Zahradní 465, 270 54 Řevničov (map)
    Czech Republic
    ID NUMBER: 63271532, Vat ID: CZ63271532

    OPENING HOURS
    MON - THURS: 9:00 - 16:00
    FRI: 9:00 - 14:00
    SO: by telephone appointment

    Write to us
    Please enter your name.
    Please enter your phone number
    Please enter your e-mail
    Please enter the text
    You must agree to process data
    All rights reserved © Hacker Model Production a.s. | Cookies
    Creation of the system InGenius Webdesign