for the laying of single and multi-track lines, you need to ensure both the correct radius and the mutual distance and coaxiality of the tracks. I-Track Spacing Segments ensure that the tracks are placed correctly on level boards. Depending on the desired track shape, use I-Track templates with the required radius or straight and assemble them into the desired shape. You can secure the segments by screwing them to the base with the supplied screws. Lay the rails on the track surface, slide the rail brackets F into the holes in the templates and press them onto the rails - the rails must fit into the grooves in the F brackets. You screw the rails or glue them with CA Hacker glue to the subsoil. After installation, you remove the brackets from the templates and use them for laying other tracks. I-Track Spacing Segments F are designed for laying "flexi" tracks to ensure the correct relative position and radius of the track curve. The set contains 12 F holders, 6 templates (30 °) according