Three-platform, expandable engine shed with 7.5 degree partitioning with ridge turrets and large side and rear windows for the locomotives in your collection with up to 290 mm overall length. Servo drive components for all gates, as well as numerous accessories such as spindle lifting jacks, engineer waiting shelter and transformer station are included in the kit.
Can be built either single- or double-tracked. Wing walls can be snapped off._x005F_x000D_
With wall card for tunnel entrance and additional wall pieces.
This microprocessor-controlled level-crossing is equipped with 4 flashing St. Andrews crosses, 2 gates over the entire width of the road and a gatekeeper’s lodge. Function is triggered through a sensor, digital input is also possible. Suitable for all types of track and several juxtaposed tracks. Can also be used in the Car System for right-hand and left-hand traffic, on one or two lanes. Stopping places have to be bought separately. 12-16 V AC/DC.
Transformer for high output. Especially applicable for the operation of fair rides, electrical appliances, lighting, power supply for Car System controls and other model making accessories. With overload protection.
This annex can be used separately or for the roundhouse. In the event of a direct entry via the turntable, engines with a length of 290 mm over buffers can be housed in the first stall and engines up to the length over buffers of 220 mm can be put in the other two stalls. Junction track angle: 15°. Only every second exit of the turntable can be used with 7.5°.
Along the railway line. Set including an engine driver waiting shelter with pavilion roof, and two trackside shanties with wooden board facing and lean-to roofs.
Faithful reproduction of a filigree steel structure, with vertical storage container. To build interesting combinations with another sanding tower, a bridge gangway is part of the kit (as 120146).
Two traffic lights with LED signals in the colours green, yellow and red with a control box. Equally suitable for Car System, Car System Digital or independent operation. The most current international signal sequences can be triggered via the inputs of the box: one regulator each for country setting and duration. Possible signal lights:_x005F_x000D_
_x005F_x000D_
-green/yellow/red_x005F_x000D_
-green/yellow/red/red-yellow_x005F_x000D_
-green/green blinking/yellow/red/red-yellow.
Parking space for the permanent stopping of vehicles in car parks. The vehicle is reactivated by means of the magnetic field of the electric coil. Connection: 16 V, AC voltage. Current draw 330 mA.
