Single track with four side walls. Minimum radius for this bridge is 396 mm (R 32 and R 31 Tillig track). Can also be used with straight track. The bridge supports can be shortened where indicated.
All bridges suitable for scale H0 are also suitable for scale TT. Wide choice under "For H0 - Bridges, tunnels".
Suitability for track systems see under tip.
Clearance without track 110 mm
Clear width between supports 130 mm
With crenellated wall and 4 side walls, mottled.
For steam or overhead electric operation and build in into track curve.
Suitability for track systems see under tip.
2 pieces
Clearance without track 70 mm
Clear width 87 mm
With crenellated wall and 4 side walls, mottled.
For steam or overhead electric operation and build in into track curve.
Suitability for track systems see under tip.
2 pieces
Clearance without track 58 mm
Clear width 48 mm
With crenellated wall, mottled.
For steam or overhead electric operation and build in into track curve.
Suitability for track systems see under tip.
2 pieces
Clearance without track 70 mm
Clear width 87 mm
Overpass with two stairways for double tracks, of which several versions can be integrated.
Railing of body-died board is made by laser cut technology. Please follow our tip written in catalogue or at www.auhagen.de.
Suitability for track systems see under tip.
Clearance without track 46 mm
Clear width 106 mm
