Hacker Activator can be used in two different ways:
1. Before gluing
Apply Hacker Activator to one of the bonded surfaces and wait a while for the spray to evaporate.
Apply Hacker instant glue to the second bonded surface. Press the bonded surfaces together and wait for the adhesive to harden.
2. After gluing
Apply Hacker instant glue to one glued surface, press the other glued surface and only then apply Hacker Activator to the glued area. Wait until the adhesive has hardened. Hacker Activator is transparent and, compared to many competing products, does not cause "foaming" or whitening of the adhesive. To achieve a smooth surface, the optimum spray distance of 30 cm should be maintained when spraying the activator. Application is only possible with the use of a suitable spray valve. Close the activator immediately after use.
Does not cause foaming of the adhesive
Areas of application: suboptimal environmental conditions, thick adhesive layers, adhesion of inactive materials or to cure spilled adhesive.
DANGER
Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Call a poison control center / physician if you feel unwell. Keep out of reach of children. Protect from heat, hot surfaces, sparks, open flames and other ignition sources - do not smoke. Do not spray on a naked flame or any other ignition source. Do not pierce or burn, even after use. Protect from sunlight. Do not expose to temperatures above 50 ° C. Repeated exposure may cause skin dryness or cracking.
Contains: Acetone
Danger
Extremely flammable aerosol.
Other hazards
In case of insufficient ventilation and / or in use, explosive / highly flammable mixtures may form.
Precautions for safe handling
Do not puncture or incinerate the container, even after use. If the activator is used in a closed room, local exhaust must be provided. Do not breathe gas / fumes / vapor / spray. Do not spray on a naked flame or any incandescent material. Protect from sunlight. Do not expose to temperatures above 50 ° C. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges. Vapors may form explosive mixtures with air. Heating causes the pressure to increase with the risk of the container bursting.
Conditions for safe storage
Keep container tightly closed. Store in a cool, well-ventilated place. Protect from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not store together with: Oxidizing agents, self-igniting or self-heating substances. Keep away from food, drink and animal feeding stuffs.
Cyanoacrylate adhesive activator accelerates the curing of CA adhesives.
Precautions
Hazard pictograms
GHS02
GHS07
GHS09
Signal word Danger
Hazardous components for labeling:
Naphtha (petroleum), hydrotreated light
Hazard Statements
H222-H229 Extremely flammable aerosol. The container is under pressure: it may rupture when heated.
H315 Causes skin irritation
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
Safety instructions
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P251 Do not pierce or burn, even after use.
P332 + P313 If skin irritation occurs: Get medical advice / attention
P405 Store locked up
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 ° C / 122 ° F
P501 Dispose of contents / container in accordance with local / regional / national / international regulations.
Odeslat zpětnou vazbu
Historie
Uloženo
Komunita
