H0 Straight segment single-track 520x80mm 1pcs.
Artikl: HCT9652
I-Track start and exit segments are designed to create a smooth transition between the incline / decline and a straight section of track. The wedge-shaped start segment compensate the height difference between the base and the first track segment. The height of the start segment corresponds to the height arrangement of the struts. The exit segment is curved into an arc. The transition segment is intended for the termination of the track and its connection, for example, to the baseboard or baseboard with hidden station. Screws are included in the set. The segments are easily assembled and glued with wood glue or with CA-Hacker glue.
More information...STOCK more than 5 pcs
7,90€
with tax6,53€
without tax
ZLEVNĚNO -5%
I-Track segments are designed for the construction of bridges, changes in track height, entrances and exits to a hidden station or a large change in height in a spiral climb. The segments are made of quality plywood as a kit. They contain a number of straight and curved segments in various lengths and radii. They are assembled one after the other into the required shape. So you don't have to cut or grind anything - you just assemble the segments into the required shape.
The segments are for single-track and double-track lines. Thanks to the construction, the segments are very rigid and resistant to bending. The pitch angle or bridging height is adjusted as required by the struts.
The segments are supplied in dimensions corresponding to the commonly supplied rails (Roco, Tillig, Fleischmann, Piko, Trix, Maerklin, Peko). Once assembled into the required shape, secure the couplings with Hacker CA adhesive or woodglue.
The segments are made in sizes and shapes for lines of sizes H0, TT and N.
