PittsBULL is our first biplane for indoor flying primarily. The basic shape of the model is based on the real Pitts Model 12 aerobatic aircraft, but of course it is designed to achieve maximum maneuverability and best flight characteristics. This is aided by the lightweight and durable design of the EPP sheets with carbon reinforcements, the huge control surfaces and the full-flying elevator, which is almost capable of 90 degree throws. In contrast to the similar indoor planes, the ailerons are controlled by two servos (especially for left and right side). In addition to making it easier to set the ailerons position and the size of the deflections on both sides, crazy pilots can try to mix ailerons as a flaps with the elevator to make even more crazy maneuvers. Weight of 160g (without batteries) is higher than one-wing models of comparable size, but is compensated by a much larger wings area, so the wing loading is still excellent. You will love this crazy PittsBull!
Items needed to complete: At least 4-channel RC kit FLYSKY FSI6 - No. HC4101
4 microservices 5.6 g No. HC4302
M Force 2815CA- 14.5 KV2300 drive unit No. HC3503B
Controller MC-12A No. HC3365
Battery LiPol 2S 450mAh No. HCACE450225
Propeller 8/4 ” No. HC5421 B
thin cyanoacrylate (CA) adhesive No. HC6430 with activator No. HC6435 and small tools.
