POKEY - FirstFly RTF++ ARMY

• RTF++ version – complete set ready to fly.

The RTF++ version is an ideal choice as a first RC airplane for beginner pilots who want everything they need in one package. The model is fully prepared from the factory and does not require building or additional electronics.

The model is equipped with a pre-installed motor, ESC and servos. The propeller is also included. A receiver is already installed in the fuselage and paired with the supplied RC transmitter.

The package also includes a Li-Pol battery with a capacity of 800 mAh and a simple charger for charging it. The only thing required are 4 AA batteries for the transmitter.

The wing tips are already glued from the factory, pushrods are installed in the fuselage and reinforcements are integrated in all three main parts of the model (fuselage, wing and horizontal stabilizer). Thanks to this, the model is very durable and ready for beginner handling.

The wing, horizontal stabilizer and landing gear are simply screwed onto the fuselage. After inserting the battery and turning on the transmitter, the model is ready to fly.

Main advantages of the model:

• Ideal first RC airplane for beginners thanks to calm and stable flight characteristics

• Complete set – model, transmitter, receiver, battery and charger in one package

• Factory-installed motor, ESC, servos and receiver

• Includes Li-Pol battery 2S 800 mAh and a simple charger

• Only 4× AA batteries for the transmitter are required

• Durable fuselage with reinforced front section for better resistance during harder landings

• Pusher motor mounted behind the wing protects the power unit and increases operational safety

• At sufficient altitude the model can recover from many critical situations on its own

• Large wheels and shock-absorbing landing gear suitable for practicing touch-and-go landings

• Possibility to fly with or without landing gear (quick removal with one screw)

• The retail packaging also serves as a transport and storage box

The RTF++ version includes everything needed for flying. After inserting the battery into the model and adding four AA batteries into the transmitter, you can go flying immediately.

The construction of the model is optimized for beginners and offers high resistance during less successful landings.
In case of minor damage, a drop of cyanoacrylate glue with activator is usually enough.