POKEY - basic Green

• Basic version – finished aircraft without electronics.

This version is an ideal first RC aircraft for beginner pilots. The model is fully prepared from the factory and does not need to be built. All main structural parts are finished and ready for use.

The model is supplied without electronics. Simply equip it with the POKEY FirstFly equipment set or with your own electronics according to your preferences.

The wing tips are already glued to the wing from the factory, the pushrod tubes are glued inside the fuselage, and reinforcements are integrated into all three main parts of the model — fuselage, wing and horizontal stabilizer. This makes the electronics installation quick and easy.

The motor, ESC, two servos and receiver can be easily installed into the prepared mounting positions in the fuselage. The servos are secured with a drop of glue, and no further gluing of the model is required. The wing, horizontal stabilizer and landing gear are simply screwed to the fuselage.

Main advantages of the model:

• Ideal first RC aircraft for beginners thanks to its calm and stable flight characteristics

• Factory-finished construction – the model does not need to be built

• Durable fuselage with reinforced front section for higher resistance during less successful landings

• Pusher motor located behind the wing protects the power unit and increases operating safety

• At sufficient altitude, the model can recover by itself from many critical situations

• Large wheels and sprung landing gear suitable for practicing touch-and-go landings

• Can be flown with or without landing gear, with quick removal using one screw

• Easy and quick installation of electronics into prepared positions

• The sales packaging also serves as a transport and storage box

Recommended components:

• Electric motor MF 2812CA-27, 80 W, kv 1780, item no. HC3503D

• ESC MC-6A, item no. HC3362

• 2× micro servo approx. 6–9 g, e.g. PS-1143, item no. HC4390

• 7" propeller, e.g. GWS 7×3.5", item no. HCG7035HD

• FLYSKY 6-channel RC system, item no. HC4101

• Li-Pol 2S 800 mAh battery, item no. HCACE2S800

After installing the electronics and inserting the Li-Pol 2S 800 mAh battery, the model is ready to fly.

The model’s construction is optimized for beginners and offers high durability during less successful landings. In case of minor damage, a drop of cyanoacrylate glue with activator is usually sufficient.