FlYSKY FS-i6 2.4 6CH AFHDS 2A transmitter

FLYSKY FSI6 2.4G 6CH AFHDS 2A RC Transmitter with 6k FS-IA6B Telemetry Receiver

FLYSKY FSI6 Transmitter specifications:

• Channels: 6 Channels

• Model Type: Glider / Helicopter / Airplane

• RF Range: 2.40–2.48GHz

• Bandwidth: 500KHz

• Band: 142

• RF Power: Less than 20dBm

• 2.4GHz System: AFHDS 2A and AFHDS

• Code Type: GFSK

• Sensitivity: 1024

• Low Voltage Warning: less than 4.2V

• DSC Port: PS2; Output: PPM

• Charger Port: No

• Antenna length: 2x 26mm (dual antenna)

• Weight: 392g

• Power: 6V (4x 1.5V AA)

• Display mode: Transflective STN positive type, 128x64 dot matrix VA73x39mm, white backlight

• Size: 174x89x190mm

• Online update: Yes

• Color: Black

• Model memories: 20

• Channel order: Aileron-CH1, Elevator-CH2, Throttle-CH3, Rudder-CH4, CH5 & CH6 assignable to other functions

FLYSKY 6k FS-IA6B Telemetry receiver specifications:

• Channels: 6 Channels

• RF Range: 2.40–2.48GHz

• 2.4GHz System: AFHDS 2A

• Code Type: GFSK

• Antenna length: 26mm

• Weight: 17g

• Power: 4.0–6.5V

• Size: 47x25x13mm

• Color: Black

• i-BUS port: Yes

• Sensor port: Yes

Features:

Works in the frequency range of 2.405 to 2.475GHz. This band has been divided into 142 independent channels, each radio system uses 16 different channels and 160 different types of hopping algorithm. This radio system uses a high gain and high quality multi directional antenna, it covers the whole frequency band. Associated with a high sensitivity receiver, this radio system guarantees a jamming free long range radio transmission.

Each transmitter has a unique ID. When binding with a receiver, the receiver saves that unique ID and accepts only data from that transmitter. This avoids receiving signals from other transmitters and significantly increases interference immunity and operational safety.

This radio system uses low power electronic components and a sensitive receiver chip. The RF modulation uses an intermittent signal, which further reduces power consumption.

The AFHDS 2A system has an automatic identification function, which allows switching between one-way communication mode and two-way communication mode according to user needs. The system includes multiple channel coding and error correction to improve communication stability, reduce the error rate and extend the reliable transmission distance.

You can connect telemetry sensors to the receiver and display the measured data directly on the transmitter.

Package Included:

• 1x FLYSKY FSI6 transmitter

• 1x FLYSKY 6k FS-IA6B telemetry receiver

• 1x Manual