The excellent quality of this quick-drying two-component epoxy adhesive ensures fast, transparent and strong gluing and repairs with a strength of 130 kg / cm2. The adhesive is resistant to moisture, oils, solvents, dilute acids and alkalis. It has high heat resistance from -40 ° C to + 100 ° C. The adhesive is crystalline clear after curing.
SCOPE OF USE:
It is suitable for bonding metals, wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, rubber, expanded polystyrene, etc., both to each other and to each other. Not suitable for bonding PP, PE, Teflon and silicone.
INSTRUCTIONS FOR USE:
Glued parts must be clean, dry and degreased. Remove the cap of the double syringe, extrude the filler and hardener in a ratio of 1: 1 (two equal strips) and mix thoroughly - the workability of the adhesive is 5 min. Apply the adhesive on one side, on rough and porous materials on both sides, press both surfaces together and fix for 20 minutes (using clamps or tape). Thoroughly clean and close the ends of the double syringe. At room temperature, the joint reaches handling strength after 20 minutes. The joint reaches its highest functional strength after 72 hours. The minimum working temperature is 15 ° C. Store in a dry and cool place.
Table of strength depending on temperature and time:
Time Strength [kg / cm 2]
10 minutes ... 15
30 minutes ... 90
60 hours ... 110
72 hours ... 180
