Vagabond XL ARF GREEN foil covered ELECTRO

The popular Vagabond XL aerobatic glider is available in an electric-powered version and attractive colour schemes. It combines exceptional manoeuvrability with convenient climbs to altitude, even without a suitable slope.

The model features an increased wingspan, a larger fuselage side area, larger tail surfaces and an all-moving tailplane with control throws of ±85°. Large full-span ailerons, a generous rudder and the all-moving tailplane provide extreme manoeuvrability.

Electric power takes you to altitude, where you can simply switch off the motor and enjoy soaring or aerobatic manoeuvres. With the motor switched off, the folding propeller folds back alongside the fuselage to reduce drag. Whenever you need to regain altitude, motor power is at your fingertips.

The durable expanded polypropylene (EPP) construction helps keep the weight low and allows the model to withstand minor crashes. The electric Vagabond XL offers plenty of scope for playful flying and trying new aerobatic manoeuvres, both on the slope and over a flat flying field.

You will need:

• An RC system with at least 4 channels, e.g. FlySky Part No. HC4101

• 3 micro servos with metal gears, weighing 10–15 g each Part No. HC4310

• 1 high-quality mini servo weighing 10–20 g for the all-moving tailplane Part No. HC4317

• 3× 200 mm servo extension leads Part No. HC4480

• A 2826CA-11 electric motor Part No. HC3507

• An electronic speed controller Part No. HC3370

• A 9/6 folding propeller Part No. HC5417B

• A 3S 1300 mAh flight battery Part No. HCACE1300325

• CA glue Part No. HC6430

• CA glue activator Part No. HC6435

• Basic modelling tools