Pokouším se připojit k serveru...

Připojení k serveru bylo ztraceno. Vyčkejte na znovuobnovení stránky, nebo ji obnovte ručně.

CONTINUE SHOPPING
MAIN MENU


Our specialisation




MAIN CATEGORIES
Blog / Articles

H0 Railway constructions

check availability
Platform barrier stood in Langenhennersdorf on the Pirna-Bad Gottleuba line. Authentic historical model
7,67€
DETAIL
check availability
With crenellated wall and 4 side walls, mottled. Not suitable for overhead electric operation. For use with straight track. Suitable for track system see under tip. 2 pieces Clearance without track 78 mm Clear width 40 mm
13,46€
DETAIL
check availability
Rotatable and fitted with a floor drain. Water cranes were found both in railroad yards and beside the tracks at through stations.
6,98€
DETAIL
check availability
Station 225 x 100 x 115 mm Optional cellar entrance can be installed in the station. Locomotive shed single track 210 x 75 x 95 mm Clear gate height without track 63 mm Clear gate width 48 mm For locomotives up to an overall length of 208 mm Shed 128 x 43 x 66 mm Waterspout 75 x 20 x 68 Platform sides 2 pieces each 241 x 7 mm Paving stone sheets, telegraph poles, benches, trees and modellerús file are included. Polish signs are also included. When using track with built-in trackbed, compensate for the extra height with the base.
82,58€
DETAIL
IN STOCK
Three-platform, expandable engine shed with 7.5 degree partitioning with ridge turrets and large side and rear windows for the locomotives in your collection with up to 290 mm overall length. Servo drive components for all gates, as well as numerous accessories such as spindle lifting jacks, engineer waiting shelter and transformer station are included in the kit.
93,79€
DETAIL
check availability
Arrivals building of the Deutsche Reichsbahn from Dresden to Chemnitz. This railway line will be crossed by narrow gauge line Wilsdruff - Frauenstein. Without platform When using track with built-in trackbed, compensate for the extra height with the base. Also suitable for H0 e/m. Authentic historical model
30,00€
DETAIL
IN STOCK
Years ago, track supervisors were responsible for shorter stretches of line than now, and the staff accordingly often consisted of the supervisor and a clerk. Larger stations often had buildings such as this, which housed in addition to office space at least one apartment for the supervisor on the upper floor. Our kit is based on a prototype built around 1900 and contains a shed and a bicycle stand.
27,33€
DETAIL
check availability
An impressive, finely detailed model of a station in the North German style with typical Prussian architectural features. The gingerbread frieze, also known as a German strip, on the facade and the segmented brick arches over the curved window with a runner layer above. The station room is supported by ornate cast iron columns. With platform and sidewalk for street side. Combined with the goods shed No. 11 383. When using track with built-in trackbed, compensate for the extra height with the base.
86,58€
DETAIL
check availability
Modelled after the signal box at Tharandt on Deutsche Reichsbahn line from Dresden to Chemnitz, with period interior. When using track with built-in trackbed, compensate for the extra height with the base. Authentic historical model
14,49€
DETAIL
check availability
This microprocessor-controlled level-crossing is equipped with 4 flashing St. Andrews crosses, 2 gates over the entire width of the road and a gatekeeper’s lodge. Function is triggered through a sensor, digital input is also possible. Suitable for all types of track and several juxtaposed tracks. Can also be used in the Car System for right-hand and left-hand traffic, on one or two lanes. Stopping places have to be bought separately. 12-16 V AC/DC.
199,54€
DETAIL
IN STOCK
Vhodné pro použití s točnami 6152, 6154 a 665201. 3 stání lokomotivy pod úhlem 7,5° s 8 otevíracími dveřmi. Mimořádně detailní plastové díly, množství jednotlivých dílů pro individuální dekoraci. Dveře jsou ovládány lokomotivami, které vyjíždějí a vjíždějí do boudy. Jedna sada dveří je umístěna v zadní části výtopny, aby v případě potřeby projela lokomotiva rovně. Několik sad kruhových remíz lze postavit vedle sebe a vytvořit tak velkou remízu.
110,55€
DETAIL
check availability
Also suitable for TT scale. Straight, with 2 arches and railings. Several kits can be combined.
9,22€
DETAIL
Blog / Articles Model Trains Shop 3D printing, 3D construction NAD 2.500,- DOPRAVA PO ČR ZDARMA

+420 313 564 381
[email protected]
Hacker Model Production a.s.
Zahradní 465, 270 54 Řevničov (map)
Czech Republic
ID NUMBER: 63271532, Vat ID: CZ63271532

OPENING HOURS
MON - THURS: 9:00 - 16:00
FRI: 9:00 - 14:00
SO: by telephone appointment

Write to us
Please enter your name.
Please enter your phone number
Please enter your e-mail
Please enter the text
You must agree to process data
All rights reserved © Hacker Model Production a.s. | Cookies
Creation of the system InGenius Webdesign