Practical holder for underfloor installation of the CarMotion Switch W.
Simply and quickly screw it to the underside of the base plate. Align the Switch with the top side of the plate and secure it at the required height by tightening a single screw.
If necessary, just loosen three screws – the device can be removed immediately without having to damage the road surface.
I-Track roadbed plates for the Car Motion System – including crossing, curve, and straight plates.
The street and crossing roadbed plates of the I-Track roadbed system are made of a special 1 mm material and are glued directly onto the base surface – either with traditional wood glue or with Hacker’s industrial CA superglue.
The roadbed plates are factory-prepared with perfectly and precisely pre-cut grooves for installing the 3×1 mm Viessmann magnetic strip (item no. V8430). The crossing roadbed plates additionally feature pre-cut openings for mounting the mechanical Viessmann turnouts (item no. V8448 or V8445). This makes installing the magnetic strip extremely easy.
At the turnout position, simply drill a 35 mm hole into the baseboard using a step drill. The mechanical turnout is then mounted on the underside of the baseboard using the I-Track Holder W (item no. HCT8408W).
I-Track roadbed plates for the Car Motion System – including crossing, curve, and straight plates.
The street and crossing roadbed plates of the I-Track roadbed system are made of a special 1 mm material and are glued directly onto the base surface – either with traditional wood glue or with Hacker’s industrial CA superglue.
The roadbed plates are factory-prepared with perfectly and precisely pre-cut grooves for installing the 3×1 mm Viessmann magnetic strip (item no. V8430). The crossing roadbed plates additionally feature pre-cut openings for mounting the mechanical Viessmann turnouts (item no. V8448 or V8445). This makes installing the magnetic strip extremely easy.
At the turnout position, simply drill a 35 mm hole into the baseboard using a step drill. The mechanical turnout is then mounted on the underside of the baseboard using the I-Track Holder W (item no. HCT8408W).
I-Track roadbed plates for the Car Motion System – including crossing, curve, and straight plates.
The street and crossing roadbed plates of the I-Track roadbed system are made of a special 1 mm material and are glued directly onto the base surface – either with traditional wood glue or with Hacker’s industrial CA superglue.
The roadbed plates are factory-prepared with perfectly and precisely pre-cut grooves for installing the 3×1 mm Viessmann magnetic strip (item no. V8430). The crossing roadbed plates additionally feature pre-cut openings for mounting the mechanical Viessmann turnouts (item no. V8448 or V8445). This makes installing the magnetic strip extremely easy.
At the turnout position, simply drill a 35 mm hole into the baseboard using a step drill. The mechanical turnout is then mounted on the underside of the baseboard using the I-Track Holder W (item no. HCT8408W).
I-Track roadbed plates for the Car Motion System – including crossing, curve, and straight plates.
The street and crossing roadbed plates of the I-Track roadbed system are made of a special 1 mm material and are glued directly onto the base surface – either with traditional wood glue or with Hacker’s industrial CA superglue.
The roadbed plates are factory-prepared with perfectly and precisely pre-cut grooves for installing the 3×1 mm Viessmann magnetic strip (item no. V8430). The crossing roadbed plates additionally feature pre-cut openings for mounting the mechanical Viessmann turnouts (item no. V8448 or V8445). This makes installing the magnetic strip extremely easy.
At the turnout position, simply drill a 35 mm hole into the baseboard using a step drill. The mechanical turnout is then mounted on the underside of the baseboard using the I-Track Holder W (item no. HCT8408W).
I-Track roadbed plates for the Car Motion System – including crossing, curve, and straight plates.
The street and crossing roadbed plates of the I-Track roadbed system are made of a special 1 mm material and are glued directly onto the base surface – either with traditional wood glue or with Hacker’s industrial CA superglue.
The roadbed plates are factory-prepared with perfectly and precisely pre-cut grooves for installing the 3×1 mm Viessmann magnetic strip (item no. V8430). The crossing roadbed plates additionally feature pre-cut openings for mounting the mechanical Viessmann turnouts (item no. V8448 or V8445). This makes installing the magnetic strip extremely easy.
At the turnout position, simply drill a 35 mm hole into the baseboard using a step drill. The mechanical turnout is then mounted on the underside of the baseboard using the I-Track Holder W (item no. HCT8408W).
Street bedding Straight element for the installation of the magnetic strip, 1 mm.
Base for the construction of Straight single- or dual-lane road sections.
Street bedding Flex element for the installation of the magnetic strip, 1 mm.
Base for the flexible construction of single- or dual-lane road sections (straight and curved).
Street bedding Straight element for the installation of the magnetic strip, 1 mm.
Base for the construction of Straight single- or dual-lane road sections.
Street bedding Flex element for the installation of the magnetic strip, 1 mm.
Base for the flexible construction of single- or dual-lane road sections (straight and curved).
Street bedding Straight element for the installation of the magnetic strip, 1 mm.
Base for the construction of Straight single- or dual-lane road sections.
Street bedding Flex element for the installation of the magnetic strip, 1 mm.
Base for the flexible construction of single- or dual-lane road sections (straight and curved).
