NEWS | www.hacker-model.com

New

Rondela Märklin C R2/R3 360°, Basic circle

IN STOCK

Rondela- R2/R3 = R437,5/515mm,360° (H0), complete kit. The complete 1-circle kit contains all the required stands, track segments, entry and exit segment, guardrail, installation parts and detailed assembly instructions. RONDELA Spiral track to change level is designed for entrances and exits to a hidden station and a large change in track height in a spiral climb. Each Rondela has the option to be assembled left hand thread or right hand thread. Suitable For: Märklin and tracks of these radii.

112,12€

DETAIL

New

Rondela next floor Märklin C R2/R3, 360°, kit

IN STOCK

Rondela Märklin C 437,5/515mm360° H0, next floor complete kit. The complete 1-circle next floor kit contains all the required stands, track segments, guardrail, installation parts and detailed assembly instructions. RONDELA Spiral track to change level is designed for entrances and exits to a hidden station and a large change in track height in a spiral climb. Each Rondela has the option to be assembled left hand thread or right hand thread. Suitable For: TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and tracks of these radii.

107,08€

DETAIL

New

Rondela Märklin C R2 540°, Basic circle

IN STOCK

Rondela- R2 = R437,5 mm, 540° (H0), complete kit. The complete 1,5-circle kit contains all the required stands, track segments, entry and exit segment, guardrail, installation parts and detailed assembly instructions. RONDELA Spiral track to change level is designed for entrances and exits to a hidden station and a large change in track height in a spiral climb. Each Rondela has the option to be assembled left hand thread or right hand thread. Suitable For: Märklin C and TRIX H0 and tracks of these radii.

139,88€

DETAIL

New

Rondela next floor Märklin C R2, 360°, kit

IN STOCK

Rondela Märklin C 437,5 mm 360° H0, next floor complete kit. The complete 1-circle next floor kit contains all the required stands, track segments, guardrail, installation parts and detailed assembly instructions. RONDELA Spiral track to change level is designed for entrances and exits to a hidden station and a large change in track height in a spiral climb. Each Rondela has the option to be assembled left hand thread or right hand thread. Suitable For: TRIX, Märklin C and tracks of these radii.

107,08€

DETAIL

New

Diesel Locomotive T 478 2079, CSD

check availability

The T 478.1 series was a universal diesel-electric locomotive built of the CSD. Between 1966 and 1971, a total of 230 locomotives of this series were delivered. From 1969 to 1970, an additional 82 locomotives were supplied as goods train variants, designated T 478.2. These locomotives were identical to the T 478.1 series, apart from the omission of a boiler.

315,25€

DETAIL

New

8430 Magnetic tape 1 mm, 5 m

IN STOCK

The self-adhesive magnetic tape has a polarized surface (south pole facing up). It guides the guide magnets of the CarMotion vehicles. Depending on the type of road, it is inserted into a prefabricated road system or installed into the system plate using a surface milling machine. Dimensions: L 500 x W 0.3 x H 0.1 cm.

18,92€

DETAIL

New

H0 CarMotion Basic Starter Set, MB Round-Cab 3-axl

check availability

CarMotion Basic Starter Set consisting of Item 8020, H0 MB round-cab 3-axle dump truck (base), 1 charger with USB cable (Item 8400), 12 permanent magnets (Item 8431), and 1 magnetic pin. Matching sound retrofit kit: Item 8454

275,58€

DETAIL

New

Electric locomotive 372 001-8, CSD,H0-16 bit SOUND

IN STOCK

Electric locomotive 372 001 of the Czechoslovak State Railways

356,19€

DETAIL

New

Servo Chaservo DS115 - 11,5mm - 15g - 6 kgcm

IN STOCK

Chaservo DS115 je první servo ve třídě 11,5mm digitálních serv osazené dvěma ložisky a robustními kovovými převody.
Toto rychlé, silné a přesné servo se hodí pro všechny druhy použití v RC modelech.
Široký rozsah napájecího napětí od 3,3V do 9V z něj dělá spolehlivé a univerzání programovatelné servo s velmi zajímavými parametry.

Při širokém rozsahu napětí dosahuje vysoké rychlosti 0,08s/60° při 8.4V.
Skříň serva je zhotovena z duralu a vysokopevnostního plastu.
Poskytuje dlouhodobé spolehlivé uložení hřídelí a tlumení vibrací.

Hodí se pro každé použití, kde je důležitá nízká hmotnost, malé rozměry a vysoký výkon.

Polymerové a hliníkové pouzdro. 2BB. Coreless DC motor. Ocelové převody.
Nominální napájecí napětí: 7,4V
Široký rozsah napájecího napětí: od 3,3V až do 9V
Převody byly optimalizovány tak, aby servo poskytovalo vysoký moment při výborné rychlosti. Servo je programovatelné adaptéry "Tool" KST.

30,24€

DETAIL

New

Double-track Märklin C.R437,5/515mm 60° 3pcs

IN STOCK

I-Track Märklin C segments are designed for the construction of bridges, changes in track height, entrances and exits to a hidden station or a large change in height in a spiral climb. The segments are made of quality plywood as a kit. They contain a number of straight and curved segments in various lengths and radii. They are assembled one after the other into the required shape. So you don't have to cut or grind anything - you just assemble the segments into the required shape. The pitch angle or bridging height is adjusted as required by the struts.

26,61€

DETAIL

New

Double track Märklin C.R360/437,5mm 60° 3pcs

IN STOCK

I-Track Märklin C segments are designed for the construction of bridges, changes in track height, entrances and exits to a hidden station or a large change in height in a spiral climb. The segments are made of quality plywood as a kit. They contain a number of straight and curved segments in various lengths and radii. They are assembled one after the other into the required shape. So you don't have to cut or grind anything - you just assemble the segments into the required shape. The pitch angle or bridging height is adjusted as required by the struts.

24,67€

DETAIL

New

Connecting/reducing Segments A 11 x 10 cm

IN STOCK

I-Track segments are designed for easy construction of elevated roads, bridges and smooth height transitions within the Car Motion system. They enable fast and precise creation of a stable road infrastructure. The segments are made of high-quality plywood and are supplied as a kit. Straight and curved versions are available, with curved segments configurable for left- or right-hand curves. The individual parts are easily assembled using CA Hacker superglue or wood glue, without the need for cutting or sanding. Thanks to their well-designed construction, the segments are strong and resistant to bending. The height and gradient of the roads can be easily adjusted using I-Track struts. The dimensions of the segments correspond to common CarMotion systems, ensuring easy compatibility and seamless integration into existing layouts.

8,21€

DETAIL