NEWS | www.hacker-model.com

New

IN STOCK

Base plate 6 cm. The board has a special construction that guarantees rigidity and very low weight. The reinforcing bars have openings at the top that can be used for cable installation. Holes in the bottom plate provide access to all locations.

60,50€

DETAIL

New

3 piece set (1): Munich-Nuremberg Express, DB AG

check availability

München-Nürnberg-Express is the name of the regional express line Munich - Ingolstadt - Nuremberg. With a maximum speed of up to 200 km/h, the trains are the fastest regional trains in Germany and the only RE trains to run the full length of a new German high-speed line. Until 2021, the fleet consisted of push-pull trainsets that were hauled by the 101 class. During morning and afternoon rush hour, an additional 10-wagon train ran between Munich and Ingolstadt, each with a class 101 at the front and rear. Altogether, 26 IC coaches, including three control cab coaches, were converted at the Neumünster depot. The service coaches are based on a Bvmsz type coach. These coaches were redesignated ABvmsz, fitted with twelve 1st class seats, and later sixteen. Only the fabric, covering the seats, was changed to pink. A set usually consists of six coaches. All coaches are pressure-proof and repainted in the DB Regio colours.

222,59€

DETAIL

New

6-piece display: Tank wagon, VTG

check availability

Kotlové vozy VTG sada 6ks Roco 6600007

297,42€

DETAIL

New

Diesel locomotive 754 083-4, ZSSK

check availability

Diesel locomotive 754 083 of the Slovakian State Railway. In the current design. Finely detailed model with many separately attached plug-in parts. In digital operation, the headlight can be switched according to the original Slovakian model The so-called "Diving goggles" or "Spectacled snake" was developed and built at CKD in Prague. The T 478.4, a further development from the predecessor type T 478.3, received a more powerful motor and an electric train heating system. In 1988, the 86 locomotives were given the new class designation 754. Locomotive 754 083 was delivered to the CSD in May 1980 as T 478.4083. When the vehicle fleet was split up on January 1, 1993, it was one of the 26 locomotives reassigned to the ZSR.

334,46€

DETAIL

New

3 piece set: Silo wagons, CSD -H0

check availability

In the late 1950s, the increasing transport of powdery materials, particularly cement, created a demand for new silo wagons. These wagons, owned by cement and lime manufacturers, were used to transport bulk goods and became part of the CSD fleet as "P" wagons, which stood for private wagons.

222,59€

DETAIL

New

3 piece set: Silo wagons, CD -H0

IN STOCK

The growing demand for transporting powdery materials, particularly cement, in the late 1950s created a need for new silo wagons. These wagons, designed for bulk transport, were owned by cement and lime manufacturers and registered in the CSD fleet as P wagons, or private wagons.

222,59€

DETAIL

New

Tabletop Model Railway Start board 110x80x10 cm

IN STOCK

Starter board for the I-Track tabletop model railway. It is delivered fully assembled, allowing you to immediately start laying tracks or building roads for CarMotion. Tracks from a starter set can be easily assembled on the board, so you can begin operation right away. After use, simply remove the locomotive and cars and store the board with the tracks safely in the supplied box. If you wish to leave the board on the table, simply place the supplied spacers in the corners and put the lid on top. This creates a safe clearance of 8 cm above the layout for locomotives and cars. Openings in the sides and bottom ensure easy access. Multiple starter boards can be connected side by side using M8 bolts with wing nuts (order number HCT8460S4), creating a large modular layout.

138,08€

DETAIL

New

Distance R track installation on Rondela 12pcs TT

IN STOCK

On the I-Track overhead tracks and the Rondela spiral climb, you ensure that the tracks are positioned correctly using the I-Track Spacers R. Slide the R Spacers onto the tracks and press them onto the I-Track segment. You put them denser in curves, larger distances are enough on the plane. You screw the rails or glue with CA Hacker glue to the track-bed. Lift the R Spacers and use them to lay next tracks. I-Track Spacers R can be used for both "flexi" tracks and track with bedding to ensure the correct track position. The set contains 12 Spacers.

6,80€

DETAIL

New